有关Kegel猜测的若干结果

Kegel曾经提出如下猜测:若环R可以表示为它的两个局部幂零子环S、T之和,即有R=S+T,问R是否必是局部幂零的?本文证明:若Kegel猜测不真,则必存在一个本原环可以表示为它的两个局部幂零子环之和.另外,还得到两个与Kegel猜测有关的很有趣的结果.     

单轴晶体内表面入射e光线的双反射

基于光线遵从的Fermat原理,从几何学的角度讨论和分析了在单轴晶体中入射的e光线在界面上的双反射,得到了确定光线反射方向的一般公式,并对几种特殊情况进行了讨论.指出了上述结果与由电磁波的边界条件计算所得结果是一致的.     

金锥对靶背向超热电子分布的影响

 采用20 TW啁啾脉冲放大的ps激光辐照金锥靶和平面靶，对靶背向产生的超热电子角分布和能谱进行了实验研究。结果表明:金锥对超热电子的产生具有重要的影响。与平面靶情况相比，锥形靶靶背向产生的超热电子数量增加，电子能量为2.0~2.5 MeV的超热电子数目有大幅度增长；锥形靶背向超热电子的空间发散角大于平面靶,这是由于啁啾脉冲放大激光所固有的较高脉冲前沿产生的预等离子体造成的影响。     

BEPCⅡ高频发射机和环流器的调整和测试

北京正负电子对撞机升级改造工程(BEPCⅡ)将采用的频率500MHz、输出功率250kW的高频发射机和环流器已安装、调整、测试和验收完毕,这是国内建立的第一套500MHz/250kW发射机系统.本文将详细介绍机器的调测试的原理和各项测量内容及结果, 并比较设计指标和要求,来阐述此发射机的实际技术指标和测试性能.     

Topological Properties of Urban Public Traffic Networks in Chinese Top-Ten Biggest Cities

We investigate the topological characteristics of complex networks as exemplified by the urban public traffic network （UPTN） in Chinese top-ten biggest cities. It is found that the UPTNs have small world behaviour, by the examination of their topological parameters. The quantitative analysis of the transport efficiency of the UPTNs reveals their higher local efficiency El and lower global efficiency Eg, which coincide well with the status quo of those Chinese cities still at their developing stage. Furthermore, the topological properties of efficiency in the UPTNs are also examined, and the findings indicate that, on the one hand, the UPTNs show robustness to random attacks and frangibility to malicious attacks on a global scale; on the other hand, the interrelation between UPTN efficiency and network motifs deserves our attention. The motifs which interrelate the UPTN efficiency are always triangular-formed patterns, e.g. motifs ID 238, ID 174 and ID 102, etc.     

The limits of hamiltonian structures in three-dimensional elasticity,shells, and rods

Summary This paper uses Hamiltonian structures to study the problem of the limit of three-dimensional (3D) elastic models to shell and rod models. In the case of shells, we show that the Hamiltonian structure for a three-dimensional elastic body converges, in a sense made precise, to that for a shell model described by a one-director Cosserat surface as the thickness goes to zero. We study limiting procedures that give rise to unconstrained as well as constrained Cosserat director models. The case of a rod is also considered and similar convergence results are established, with the limiting model being a geometrically exact director rod model (in the framework developed by Antman, Simo, and coworkers). The resulting model may or may not have constraints, depending on the nature of the constitutive relations and their behavior under the limiting procedure. The closeness of Hamiltonian structures is measured by the closeness of Poisson brackets on certain classes of functions, as well as the Hamiltonians. This provides one way of justifying the dynamic one-director model for shells. Another way of stating the convergence result is that there is an almost-Poisson embedding from the phase space of the shell to the phase space of the 3D elastic body, which implies that, in the sense of Hamiltonian structures, the dynamics of the elastic body is close to that of the shell. The constitutive equations of the 3D model and their behavior as the thickness tends to zero dictates whether the limiting 2D model is a constrained or an unconstrained director model. We apply our theory in the specific case of a 3D Saint Venant-Kirchhoff material andderive the corresponding limiting shell and rod theories. The limiting shell model is an interesting Kirchhoff-like shell model in which the stored energy function is explicitly derived in terms of the shell curvature. For rods, one gets (with an additional inextensibility constraint) a one-director Kirchhoff elastic rod model, which reduces to the well-known Euler elastica if one adds an additional single constraint that the director lines up with the Frenet frame. This paper is dedicated to the memory of Juan C. Simo This paper was solicited by the editors to be part of a volume dedicated to the memory of Juan Simo.     

Modification to the Fringe Component of Diffraction Coefficient in TD-EEC Method

A modified formulation for fringe component of diffraction coefficient is implemented to TD-EEC method. An example of diffraction by perfectly conducting plate is used to illustrate our scheme. Comparing with the FDTD results we observe that the improved expression for fringe component is more accurate than that of Michaeli's formulation. This high frequency time domain technique is available for treating the bistatic scattering problems for millimeter waves.     

Circuit analysis of the compound quasi-optical power combiner

In 1991, we developed a new type of quasi-optical power combiner, called a compound quasi-optical power combiner, at Ka-band. In this paper, the circuit of such a compound quasi-optical power combiner is analysed. Its equivalent circuit model is proposed. The circuit equations, the balance condition, the injection locking and the stabilized condition of the compound quasi-optical power combiner are studed by the equivalent circuit model. As an example, a compound quasi-optical power combiner which consists of two single—cavity, two—device power combiners is analysed     

关于修正的Baskakov算子的Stechin-Marchaud型不等式

利用K-泛函研究了修正的Baskakov型算子的Stechin-Marchaud型不等式,由此不等式,我们得到了关于ω2φλ的逆结果.